Large-format High-speed Fabric Laser Cutting Machine

Designing Equipment to Meet Actual Production Goals

The large-format High-speed Fabric Laser Cutting Machine utilizes an industrial camera-based panoramic vision recognition system and a CO₂ laser, designed for continuous cutting operations requiring high cycle rates.The equipment is available in 9 models ranging from the DF-1820 to the DF-2030, with working dimensions ranging from 1800 × 2000 mm to 2000 × 3000 mm and laser power options ranging from 180 to 300 W.with a total system power not exceeding 5,000 W. Cutting and engraving speeds range from 0–2,000 / 0–2000, with a repeat positioning accuracy of ±0.05 mm. It utilizes water-cooling and stepper/servo motor drives, supports common drawing formats such as DWG, DXF, AI, and CDR, and allows file transfer via USB cable, USB flash drive, or Ethernet cable.

Equipment Advantages

1. High-Speed Cutting and Engraving:Cutting and engraving speeds reach 0–2,000 / 0–2,000, significantly higher than the 0–1,000 / 0–1,500 of conventional models. This reduces the cutting cycle time per piece for orders with a large number of cut pieces and high single-shift output requirements, making it suitable for continuous batch cutting.
2. Large-format Visual Recognition and Positioning:The machine is equipped with an industrial camera that, in conjunction with a panoramic vision system, recognizes and positions printed patterns, textures, and contours on the fabric. This allows for direct contour cutting on pre-printed or patterned fabrics, reducing the need for manual alignment, tracing, and repetitive nesting.
3. High-Power Laser Configuration:Laser power options range from 180 to 300 W, with a total system power not exceeding 5,000 W. This configuration accommodates thicker fabrics, multi-layer cutting, and engraving applications, balancing speed with cut quality.
4. Water-cooled system, suitable for long-term continuous processing:The entire machine employs a water-cooling system, with an operating temperature range of 0–45°C and operating humidity of 5%–95%, making it suitable for long-term continuous cutting operations in a workshop environment.
5. Repeatability of ±0.05 mm:Repeatability of up to ±0.05 mm, combined with a stepper/servo motor drive system, helps maintain dimensional consistency in batch cutting during high-speed operation and reduces the need for secondary trimming.
6. Large-format worktable, 9 sizes available:Nine worktable sizes are available, ranging from 1800×2000 mm to 2000×3000 mm. Users can select the appropriate size based on cut piece dimensions, nesting patterns, and single-shift output to minimize the need for panel assembly and material changes.
7. Multiple drawing formats and transfer methods:Supports formats such as DWG, DXF, AI, CDR, PLT, BMP, JPG, TIFF, and GIF. Files can be transferred via a USB cable connected to a computer, a USB flash drive, or an Ethernet cable, facilitating seamless integration with existing layout and pattern-making workflows.

Applicable Industries and Use Cases

This machine is suitable for industries such as cycling apparel, sportswear, swimwear, dancewear, printed garments, home textiles, footwear, lace, handbags, gloves, luggage,car seat cushions, leather goods, plush fabric toys, and paper products. It can be used for fabric cutting, pattern outline cutting, trim and lace cutting, shoe material cutting, cutting of components for luggage and car seat cushions, leather goods cutting, and die-cutting of paper products.For apparel, home textiles, and luggage processing with large order volumes and high demands on single-shift output and delivery lead times, high-speed configurations should be prioritized; for fabrics with printed patterns or textures, visual recognition can be used for positioning before contour cutting.Before mass production, it is recommended to create prototypes using the actual fabric to verify the cutting results, the condition of the fused edges, and the nesting layout.

Technical Specifications

Model Specifications

Note:The above specifications are for reference only for standard configurations. Working dimensions, laser power, total machine power, cutting and engraving speeds, and vision system configurations may be adjusted based on the actual fabric, cut piece dimensions, and customization requirements. Final specifications are subject to technical confirmation and the contract.

Operating and Safety Instructions

CO₂ lasers are high-intensity lasers that are either invisible or barely visible. During equipment operation, it is strictly prohibited to open the machine cover to observe the cutting area. Laser safety goggles rated for the appropriate wavelength must be worn, and it must be confirmed that the machine cover interlock, emergency stop button, and warning signs are in proper working order.During high-speed operation, the cutting head moves rapidly back and forth; operators must not reach into the cutting area while the machine is running. When addressing material misalignment, material breakage, or jams, press the emergency stop button first. Smoke, dust, and odors are generated during processing; ensure that the exhaust and filtration systems are functioning properly and that the workshop is well-ventilated.The water-cooling system should be inspected regularly for water temperature, water level, and pipe seals to prevent laser power degradation or component damage caused by insufficient cooling.The equipment must be reliably grounded; workshops with significant power supply and voltage fluctuations are advised to install a voltage stabilizer. After changing the fabric or adjusting the material feed method, perform a test cut on a small sample first to confirm the focal length, power, speed, and cut quality before proceeding to mass production; after shutdown, clean any residual debris from the worktable and perform routine maintenance as specified in the manual.

Selection Recommendations

When selecting a model, first confirm the maximum outer dimensions of a single fabric piece and the nesting layout. It is recommended to allow a 100–200 mm margin beyond the maximum fabric piece size for nesting and clamping;At the same time, verify the fabric type, thickness, whether it features printed patterns, and whether registration cutting is required to determine if industrial camera-based visual positioning is necessary.Production volume is the primary consideration when selecting a high-speed model: For scenarios involving large order batches, the need to reduce the cutting cycle time per piece, or the desire to minimize the number of machines, a high-speed configuration with cutting and engraving speeds of 0–2,000 / 0–2,000 is recommended;For scenarios involving a wide variety of fabric types, primarily characterized by small batches and multiple varieties, a standard-speed configuration may be considered.Regarding power, laser power in the range of 180–300 W can be selected based on fabric thickness and multi-layer cutting requirements. Additionally, confirm the workshop voltage, ventilation and fume extraction conditions, water-cooling space, and equipment feed path; if necessary, provide actual fabric samples and cutting drawings for test-cutting verification.

Applications

The Large-format High-speed Fabric Laser Cutting Machine is suitable for cutting and engraving processes in industries such as apparel, home textiles, footwear, luggage, automotive interiors, toys, and paper products. It can be used for cutting fabric pieces for cycling apparel, sportswear, swimwear, dancewear, and printed garments; for pattern cutting of home textile fabrics;cutting lace and trimmings, cutting shoe materials and uppers, cutting panels for handbags, gloves, and luggage, cutting automotive seat cushions, cutting leather goods, cutting plush fabric toys, and die-cutting paper products.The combination of industrial camera-based vision positioning and a high-speed, large-format worktable is ideal for mass production scenarios that require contour cutting on patterned fabrics and demand consistent single-shift output and cut piece dimensions.

To confirm the working dimensions, laser power, cutting speed, and vision positioning configurations of the Large-format High-speed Fabric Laser Cutting Machine, please refer tothe Fabric Laser Cutting Machine product category, or viewthe Large-format Fabric Laser Cutting Machine and Fabric Laser Cutting Machine Delivery and Process Commissioning Case Studies. You may alsocontact usfor model selection recommendations, fabric test cuts, and quotation proposals.