DTF Powder Shaker
DTF Powder Shaker DF900L
DF900L(A) DTF Powder-Shaking Dryer with a heating width of 600 mm, featuring fluorescent tub…
Downstream equipment for DTF printing. It spreads adhesive powder evenly onto the printed film, reclaims the excess powder and dries and cures it. Used together with a DTF printer, it determines the transfer durability and hand feel of the finished film. Available for different widths and capacities.
DTF Powder Shaker
DF900L(A) DTF Powder-Shaking Dryer with a heating width of 600 mm, featuring fluorescent tub…
DTF Powder Shaker
The 2030-X5 / DF300 is a 300mm-wide DTF white ink heat transfer system: The 2030-X5 DTF Film…
DTF Powder Shaker
The DF700Pro Powder Sifting and Drying Machine has a heating width of 600 mm and a lamp heat…
We are a manufacturer of printing equipment based in Dongguan, Guangdong. Founded in 2003, we handle all aspects of our business—from research and development to precision machining, assembly, and commissioning—in our own factory. Our equipment has been exported to 83 countries and regions.
Sublimation drum transfer is suitable for continuous mass production of synthetic fabrics, offering high design fidelity, consistent colors, and low unit costs; for small-batch orders with multiple designs, digital printing may be a better option. Send us your fabric and design, and we’ll provide recommendations based on a side-by-side comparison.
Sure. Please send us the fabric and design, and we’ll create a sample using the appropriate machine model. We’ll provide you with parameters such as temperature, pressure, and speed, along with a sample piece of fabric. Once you’ve confirmed the transfer results, we’ll finalize the machine model.
Yes. The web width, speed, tension control, and unwinding, web guiding, and rewinding configurations can all be adjusted according to the fabric characteristics and production capacity goals.
It is essential. For DTF-printed transfers, the design will only adhere firmly to the fabric during heat pressing after the transfer has been dusted with heat-melt powder and dried to cure; without this step, the transfer cannot be used.
Match the printer’s maximum print width: Use the DF300 for 300mm models and the DF900L or DF700Pro for 600mm models. If the powder shaker’s width is smaller than the printer’s, it will limit the production output of the entire line.
For the DF700Pro, the recommended platform temperature is 75°C for heating and 110°C for drying; for the DF900L, the lamp heating reaches approximately 110°C. If the temperature is too high, oil and water may separate; if it is too low, the toner will not cure properly.
Hot air and a slight odor may be present during operation, which is normal; the DF900L wide-format model features an electric field purification system and triple filtration, which significantly reduce odors in the air. We recommend using it in a well-ventilated workshop.
View the product catalog for heat transfer roller printing machines, sublimation equipment, and related products, with support for online previews and PDF downloads.