Rolling Platform Die-cutting Machine

Designing Equipment to Meet Actual Production Goals

The FC7090U Rolling Platform Die-cutting Machine is designed for contour cutting of materials such as crystal labels, heat press graphics, adhesive labels, and magnetic stickers. It employs a servo motor-driven transmission system with imported linear guides, combined with a camera-based positioning and real-time tracking system,automatic contour extraction, and a rolling-table automatic feeding mechanism. The machine has a cutting area of 600 × 900 mm and supports automatic segmented material feeding. Cutting speeds range from 1 to 800 mm/s,with a maximum cutting thickness of 1.2 mm and a mechanical resolution of 0.05 mm. It uses double-sided tape and vacuum suction for material fixation and is equipped with a high-definition LCD touchscreen, supporting data transfer via USB, flash drives, and Ethernet ports.

Equipment Advantages

1. Servo Drive Combined with Imported Linear Guides:The machine uses a drive system where a servo motor drives imported linear guides, combined with intelligent AI algorithms to process irregular cutting paths, providing a more stable operating experience for contour cutting of complex shapes.
2. Camera-Based Real-Time Tracking:The machine is equipped with a camera-based real-time tracking system that quickly identifies the position of patterns on materials such as crystal labels and heat press prints, enabling precise alignment and cutting. This system accommodates a wide range of complex, irregular shapes and minimizes manual alignment errors.
3. Automatic Contour Extraction and Edge-Tracing Cutting Eliminate the Need for Specialized Operators:With automatic contour extraction, edge-tracing cutting no longer requires specialized computer operators, significantly lowering the entry barrier for equipment operators and enabling faster job changeovers.
4. Multi-Zone Vacuum Suction Platform:Featuring a patented platform structure and multi-zone vacuum suction design, it offers low noise and strong suction, ensuring even small samples are securely held in place. Combined with double-sided tape, it accommodates the securing needs of various materials.
5. High-Definition LCD Touchscreen:Equipped with a high-definition LCD touchscreen, the interface is intuitive and easy to use, allowing material parameters and cutting tasks to be adjusted directly on the machine.
6. Multiple Data Transfer Interfaces:The machine offers a comprehensive range of data transfer interfaces, supporting USB, offline USB flash drives, and Ethernet ports; Wi-Fi is available as an option, accommodating file transfer preferences in various workshop environments.
7. Automatic Feeding, Compatible with Long Formats and Roll Materials:The automatic feeding mechanism facilitates seamless processing of long-format cuts. Combined with a camera-based positioning and real-time tracking system, it achieves precise and stable contour cutting; the rolling platform supports automatic, segmented material feeding while also accommodating continuous processing of roll materials.
8. Proprietary High-Speed Servo Motion Control System:Equipped with a proprietary multi-axis high-speed servo motion control system, it delivers precise cutting and smooth curves, making it ideal for cutting graphics that require high precision in curved contours and fillet radii.
9. Streamlined Sheet Metal Chassis:Featuring a meticulously designed streamlined sheet metal chassis, the machine boasts a compact structure and easy mobility. With dimensions of 1460 × 1300 × 1000 mm, it facilitates workshop layout and workstation adjustments.

Applicable Industries and Use Cases

This machine is primarily used for contour cutting of crystal labels and heat press prints. It can also be used for half-cut and full-cut operations on materials such as dry adhesives and magnetic stickers. It is suitable for small-batch, high-variety production in industries such as labels, advertising signage, apparel accessories, packaging, and handicrafts.The combination of camera-based real-time tracking and automatic contour extraction allows for direct edge-following cutting of patterned rolls and sheets without manual tracing; the rolling platform and segmented automatic material feeding are suitable for continuous processing of long-format and roll materials. For cutting sheet materials, a vibrating knife configuration is available as an optional accessory.Before mass production, it is recommended to perform a test cut using the actual material to confirm the cutting thickness, pressure, and blade type settings.

Technical Specifications

Key Specifications

Note:The above specifications are for reference only and represent the standard configuration. Cutting area, cutting thickness, cutting pressure, blade configuration, and feeding method may be adjusted based on actual materials and custom solutions; final specifications are subject to technical confirmation and the contract.

Operating and Safety Instructions

The equipment uses blades for half-cut or full-cut operations and is classified as mechanical cutting equipment. During operation, it is strictly prohibited to extend hands or any part of the body into the cutting head’s range of motion; before replacing blades, cleaning the worktable, or removing cut pieces, the program must be stopped, and it must be confirmed that all moving parts have come to a complete stop.When changing materials, select the appropriate blade type based on the material’s thickness and structure, and adjust the cutting pressure and depth to prevent the blade tip from damaging the worktable or cutting through the backing paper. The platform continues to move during vacuum suction and automatic segmented material feeding; press the emergency stop button before addressing material misalignment, jams, or material splices.Keep the camera and positioning lens clean to prevent dust from affecting recognition accuracy. The equipment is powered by 220 V AC ± 10% and must be reliably grounded; workshops with significant voltage fluctuations are advised to install a voltage stabilizer. Perform routine maintenance as specified in the manual, including cleaning the guide rails, checking the tension of the synchronous belt, and lubricating moving parts.

Selection Recommendations

When selecting a model, first confirm the type and thickness of the material to be cut, as well as whether it features a pattern: materials such as crystal labels, heat press prints, dry adhesives, and magnetic stickers are suitable for this machine’s physical half-cut and full-cut methods. If you need to cut sheet materials, you may opt to install a vibrating knife as an accessory.Regarding working area, the machine features a cutting area of 600 × 900 mm and supports automatic segmented material feeding, making it suitable for small- to medium-sized sheet materials as well as continuous processing of roll materials. If you frequently process long-format materials, pay close attention to the feeding mechanism’s splicing method and roll material loading conditions.For orders with high pattern alignment requirements, we recommend using the camera-based positioning system with real-time tracking and automatic contour extraction, which can significantly reduce manual tracing work. Additionally, you should verify the workshop’s power and air supply conditions, table space availability, and file transfer methods (USB, flash drive, or Ethernet port).

Applications

Rolling Platform Die-cutting Machines are suitable for contour cutting of crystal labels and heat press graphics, as well as half-cut and full-cut processing of materials such as dry adhesives and magnetic stickers. They are applicable in industries including label and self-adhesive processing, advertising signage, apparel accessories, packaging products, and handicrafts.The combination of automatic feeding on a rolling platform, real-time tracking via camera positioning, and automatic contour extraction makes this machine ideal for processing scenarios involving small batch sizes but a wide variety of products, complex patterns and shapes, and the need for rapid job changeovers. It is also suitable for use as a dedicated cutting station on signage and label production lines.

To confirm the cutting area, cutting thickness, blade configuration, and feeding method of the Rolling Platform Die-cutting Machine, please refer tothe Fabric Laser Cutting Machine product category, or visitthe Vibrating Knife Cutting Machine pageto learn about blade-cutting equipment.Youmay alsocontact usfor product selection advice, material test cuts, and pricing quotes.