DTF Powder Shaker DF900L
Equipment Model:DF900L(A)
DF900L(A) DTF Powder-Shaking Dryer with a heating width of 600 mm, featuring fluorescent tube heating (3.9 kW), total power of 4000W, operating power of 2200W–3000W, supports automatic powder feeding and low-powder alerts, features a triple-filtration purification system in the power distribution area with front and rear air extraction, ensures zero waste during scrap material removal, and is designed for use with DTF heat transfer printers.
DTF Powder Shaker
Designing Equipment to Meet Actual Production Goals
The DF900L(A) DTF Powder Shaking and Drying Machine is used for post-processing after printing DTF white ink heat transfer films. It automatically applies powder, shakes it, and dries and cures the material. It has a heating width of 600 mm and uses tube heating (3.9 kW). total power of 4000W, operating power of 2200W–3000W, a power distribution area with purification and triple filtration, and front-to-back suction for material feeding. Designed for use with DTF heat transfer printers, it determines the durability and texture of the transferred film.
Product Features
Cost Savings
- Energy Savings:Total power: 4,000 W; operating power: 2,200 W–3,000 W.
- Labor Savings:Automatic powder loading with low-powder alert; a single refill lasts over four hours, reducing the need for manual supervision.
- Space Savings:Overall machine length: 2226 mm; despite the extended heating zone, the overall length is actually reduced by 600 mm.
Safety
- No contact with print heads:If the powder shakers are misaligned with the heat transfer machine during printing, the transfer film will not come into contact with the print heads.
- Width: 890 mm:It can pass directly through a 900 mm door without the need to remove the door or break the frame, reducing safety hazards.
- Ground Fault Circuit Interrupter (GFCI):The main power supply in the distribution box is equipped with a GFCI to prevent accidental electric shock.
- Shutdown Upon Lid Opening:In automatic mode, opening the powder hopper or powder-shaking chamber stops the motor; opening the heating chamber stops the heating process; the oil and water collection unit features a full-tank alarm to prevent accidents caused by overflow.
Environmentally Friendly
- Air Purifier:The electric field purification system eliminates oil fumes, and triple filtration effectively reduces odors in the air.
- Low Noise:The suction system uses a small fan, producing no harsh noise.
Easy to Operate
- Clear Control Panel:The interface is straightforward and the buttons are intuitive, making operation convenient.
- Front and Rear Air Suction:The conveyor belt has air suction at both the front and rear, ensuring no material is lost when feeding off-cuts.
Industry Applications
Suitable for custom white ink heat transfer printing on items such as shirts, pants, hats, shoes, throw pillows, cloth bags, aprons, washed labels, reflective vests, and volunteer vests.
Technical Specifications
| Machine Model | DF900L(A) Powder Shaking and Drying Machine |
|---|---|
| Drying Method | Fluorescent tube heating (power: 3.9 kW) |
| Heating Width | 600 mm |
| Media Conveyance | Conveyor belt and dual-drive paper take-up unit |
| Equipment Power | 4000 W |
| Input Power | AC 220 V |
| Operating Environment | Temperature: 18–30°C, Humidity: 40–60% |
| Equipment Weight | Net Weight: 310 kg, Gross Weight: 375 kg |
| Machine Dimensions | 2226 × 940 × 945 mm |
| Packaging Dimensions | 2310 × 1084 × 1130 mm |
Configured for stable mass production
- Tube heating, heating width 600 mm, drying power 3.9 kW
- Total power 4,000 W, operating power only 2,200–3,000 W
- Automatic powder feeding + low-powder alarm; a single powder refill lasts over four hours
- Electrostatic purification eliminates oil fumes; triple filtration reduces odors; low operating noise
- Width: 890 mm; fits through a 900 mm door
- Front and rear air intake; mesh belt conveys scrap material with no waste
- Automatic shutdown when the lid is opened + ground fault protection + oil and water overflow alarm
Matching Processes to Material Properties
Expand Modules According to Production Line Requirements
Frequently Asked Questions About “DTF Powder Shaker”
12 Is a DTF powder shaker a must-have?
It is essential. For DTF-printed transfers, the design will only adhere firmly to the fabric during heat pressing after the transfer has been dusted with heat-melt powder and dried… Read the full answer
13 How do you choose the heating width for a flour sifter?
Match the printer’s maximum print width: Use the DF300 for 300mm models and the DF900L or DF700Pro for 600mm models. If the powder shaker’s width is smaller than the printer’s, it… Read the full answer
14 What should the drying temperature be set to for a flour sifter?
For the DF700Pro, the recommended platform temperature is 75°C for heating and 110°C for drying; for the DF900L, the lamp heating reaches approximately 110°C. If the temperature is… Read the full answer
15 Does the dough shaker produce cooking fumes or odors?
Hot air and a slight odor may be present during operation, which is normal; the DF900L wide-format model features an electric field purification system and triple filtration, which… Read the full answer
Inquire about the detailed specifications for this device
Please provide us with the material, roll width, speed, and target production capacity, and our engineers will evaluate the equipment configuration and delivery time.
- One-on-One Engineer Evaluation
- Configuration Plan Based on Materials and Production Capacity
- We will respond within one business day
You can also contact us directly
- Email [email protected]
- Phone +86 13713137075
- WhatsApp +86 13713137075
