Manual Heat Press Machine

Designing Equipment to Meet Actual Production Goals

The ZS-SY Manual Heat Press Machine is a manual high-pressure flatbed heat press machine available in four printing areas: 38×38 cm, 40×60 cm, 60×80 cm, and 70×90 cm. It offers a choice of 110V,220V, or 380V, and power configurations of 1600W, 2600W, and 3200W.The machine’s temperature range is 0–210°C, and its time range is 0–999 seconds, making it suitable for heat transfer and heat press printing on T-shirts, sweatshirts, garment pieces, canvas bags, throw pillows, and other flat materials.

Equipment Advantages

1. Manual, High-Pressure, Stable Laminating:Features a manual lever-operated pressure mechanism that applies force directly to the platen, making it suitable for DTF Films, heat press transfers, and other flat-surface transfer processes requiring stable pressure and temperature.
2. Four print area options:Available in 38×38 cm, 40×60 cm, 60×80 cm, and 70×90 cm sizes, covering small designs, front and back panels of garments, large-format fabric pieces, and combined designs.
3. 0–210°C Digital Temperature Control:The temperature setting range covers the process requirements for common heat transfer materials, making it easy to adjust the temperature based on material thickness and transfer substrate.
4. 0–999 s Timer Control:Pressing time can be set in seconds, ensuring consistent transfer cycles during mass production and reducing timing errors caused by manual timing.
5. Multiple voltage and power configurations:Supports 110 V, 220 V, 380 V, and 1,600 W, 2,600 W, 3,200 W, among other specifications, allowing selection based on region, power supply conditions, and production capacity requirements.
6. Intuitive design and simple operation:Ideal for garment printing workshops, customization stores, and sample production scenarios. Material changes, positioning, and parameter adjustments are intuitive, facilitating small-batch production of multiple product varieties.

Applicable Industries and Use Cases

The ZS-SY Manual Heat Press Machine is suitable for flat heat pressing and heat transfer on apparel materials such as cotton, blended fabrics, and synthetic fabrics. It can also be used for personalized processing of products like T-shirts, sweatshirts, work uniforms, canvas bags, throw pillows,mouse pads, jigsaw puzzles, and garment cut pieces. Since different materials have varying requirements for temperature, pressure, and time, it is recommended to conduct a test run using the same fabric and transfer medium before mass production to confirm adhesion, colorfastness, and hand feel.

Technical Specifications

Note:The above specifications are for reference purposes only for standard configurations. Voltage, power, print area, appearance, and weight may be adjusted based on customization requirements; final specifications are subject to the technical proposal and contract.

Operating and Safety Instructions

The equipment uses a heated plate for heat pressing. The heating plate reaches high temperatures during operation; avoid direct contact with the heating surface during operation and cleaning. Ensure the temperature is within a safe range before placing or removing materials.Since the equipment features pneumatic or electric pressing mechanisms, never place your hands between the heating plate and the base during operation. Before adjusting pressure, replacing heating elements, or servicing transmission components, the machine must be shut down and the pressure released. The equipment must be properly grounded; keep the power cord away from heating components, and keep the control cabinet dry and clean.Routine inspections should be conducted in accordance with the manual to check the heating elements, temperature control display, pneumatic or electric mechanisms, and the emergency stop button. If abnormal temperatures, air leaks, or unusual noises are detected, shut down the machine immediately for maintenance. This machine has a power rating of 1600 / 2600 / 3200 W (customizable); before wiring, verify that the workshop’s power capacity meets the requirements.

Selection Recommendations

When processing standard T-shirts and small designs, prioritize the 38×38 cm or 40×60 cm models; when covering large garment panels, composite designs, or larger products, choose the 60×80 cm or 70×90 cm models.When selecting a model, verify the local voltage, workshop power capacity, commonly used material dimensions, and daily production requirements to ensure the appropriate power rating and production cycle are matched.

Applications

The ZS-SY can be used for processing flat products such as garment heat press transfers, DTF Film pressing, T-shirt customization, sweatshirt printing, canvas bag production, pillow making, mouse pad transfers, and jigsaw puzzle lamination.The machine is suitable for sample production, small-batch customization, and medium-batch production, and can also be used in conjunction with cutting, drying, and finishing equipment.

To confirm the dimensions, voltage, and power specifications of the ZS-SY Manual Heat Press Machine, please refer tothe Heat Press Machine product category or contact usfor model selection advice, sample testing, and a quote.