DTF Powder Shaker DF900L
Equipment Model:DF900L(A)
DF900L(A) DTF Powder-Shaking Dryer with a heating width of 600 mm, featuring fluorescent tube heating (3.9 kW), total power of 4000W, operating power of 2200W–3000W, supports automatic powder feeding and low-powder alerts, features a triple-filtration purification system in the power distribution area with front and rear air extraction, ensures zero waste during scrap material removal, and is designed for use with DTF heat Transfer Machines.
DTF Powder Shaker
Designing Equipment to Meet Actual Production Goals
The DF900L(A) DTF Powder Shaking and Drying Machine is used for post-processing DTF white ink DTF Film after printing, and is responsible for automatic powder application, powder shaking, and drying/curing.With a heating width of 600 mm and tube heating (3.9 kW), the machine has a total power rating of 4000 W and an operating power range of 2200 W–3000 W. It features a clean power supply with triple filtration and front-to-back suction for material feeding. Designed to work in conjunction with DTF heat Transfer Machines, it ensures the durability and texture of the transferred film.
Product Features
Cost Savings
- Energy Savings:Total power: 4000W; operating power: 2200W–3000W.
- Labor Savings:Automatic powder feeding, low-powder alert, and a single refill lasts over four hours, reducing the need for manual supervision.
- Space-saving: The machine is 2,226 mm long; despite the extended heating zone, the overall length is actually reduced by 600 mm.
Safety
- No contact with the print head:Even if the powder shakers are misaligned during printing, the transfer film will not come into contact with the print head.
- Width: 890 mm:It can pass directly through a 900 mm door without having to remove the door or damage the frame, reducing safety hazards.
- Ground Fault Circuit Interrupter (GFCI):The main power supply in the distribution panel is equipped with a GFCI to prevent accidental electric shock.
- Shutdown upon Lid Opening:In automatic mode, opening the powder hopper or shaking chamber stops the motor; opening the heating chamber stops the heating process; the oil and water collection system features a full-tank alarm to prevent accidents caused by oil or water overflow.
Environmental Protection
- Air Purifier:The electric field purification system eliminates oil fumes, and triple filtration effectively reduces odors in the air.
- Low Noise:Uses a small fan for air intake, producing no harsh noise.
Easy to operate
- Clear control panel:The interface is clear and the buttons are intuitive, making operation convenient.
- Front and rear suction:The mesh belt features suction at both the front and rear, ensuring no material is wasted when feeding off-cuts.
Industry Applications
Suitable for custom white-ink heat transfer printing on items such as shirts, pants, hats, shoes, throw pillows, cloth bags, aprons, care labels, reflective vests, and volunteer vests.
Technical Specifications
| Machine Model | DF900L(A) Shaking Powder Dryer |
|---|---|
| Drying Method | Fluorescent Tube Heating (Power: 3.9 kW) |
| Heating width | 600 mm |
| Media Conveyance | Conveyor Belt Transport and Dual-Drive Paper Take-Up |
| Power | 4000W |
| Input Power | AC 220V |
| Operating Environment | Temperature: 18–30°C, Humidity: 40–60% |
| Equipment Weight | Net Weight: 310 kg, Gross Weight: 375 kg |
| Machine Dimensions | 2226 × 940 × 945 mm |
| Packaging Dimensions | 2310 × 1084 × 1130 mm |
Suitable for which production scenarios
The DF900L(A) is also designed for 600mm membranes, but features guide belt conveyance, dual-drive paper collection, automatic powder application, and a low-powder alarm. With a machine width of 890mm, it can pass through a 900mm doorway. It is better suited for workshops requiring long continuous operation and strict dust and fume control.
This machine’s model/configuration isDF900L(A), with an effective printing width of600 mm, and a power rating of400 mm.print width of600 mm, and a power rating of4000 W (2200–3000 W during operation).Typical applications include apparel, footwear, and luggage manufacturing scenarios that require continuous production of white-ink DTF Films. When determining suitability, you should evaluate your specific fabrics, designs, order volumes, and post-processing equipment together—do not rely solely on the machine’s maximum speed.
How to Estimate Production Capacity
The operating modes listed in the equipment specifications include: Conveyor belt transport
Dual-drive take-up unit
Automatic powder application
Fluorescent tube heating and drying, 3.9 kW. The production capacity of the powder shaker must be calculated based on the printer width, film length, powder distribution uniformity, drying speed, and take-up stability.Mismatched web widths between two machines often cause downtime more frequently than insufficient speed in a single machine.
Supporting Processes and Easily Overlooked Costs
DTF production involves more than just purchasing a single machine.Printing film, DTF ink, TPU Hot Melt Powder, powder-shaking dryers, heat press machines, and scrap rates all affect the cost per unit.The print width, film roll length, powder application width, and heat press table size should be matched as closely as possible; otherwise, trimming, film splicing, and secondary processing may be required.
Installation, Maintenance, and Procurement Verification
- Verify that the on-site power supply, number of phases, grounding, and circuit capacity match the machine’s4,000 W (operating power: 2,200–3,000 W) specifications.
- Pay close attention to powder drying, uniform powder distribution, residual powder recovery, cleanliness of the heating zone, conveyor belt misalignment, and exhaust ventilation.
- Verify equipment dimensions, entry pathways, floor load capacity, and space required for operation and maintenance;For high-volume production, also consider the storage locations for film rolls or paper rolls.
- We provide model selection evaluation, sample testing, installation and commissioning, operator training, spare parts supply, and long-term technical support.;12-month warranty for the entire machine; the specific scope of coverage is subject to the contract and accompanying documentation.
Recommended Information to Prepare Before Purchase
Please provide information on commonly used fabrics and weight (grams per square meter), finished product dimensions, pattern details, estimated daily output, existing printing or transfer equipment, workshop power supply, and available space. If conditions permit, conduct prototyping and continuous material feeding tests using actual materials before finalizing the model, print width, and supporting equipment.
Related Equipment and Documentation
The DF900L is suitable for continuous DTF production scenarios. When selecting a model, we recommend verifying the print width, powder recovery, and the cycle times for unwinding, rewinding, and heat pressing.
Configured for stable mass production
- Tube heating, heating width 600 mm, drying power 3.9 kW
- Total power 4,000 W, operating power only 2,200–3,000 W
- Automatic powder feeding + low-powder alarm; a single powder refill lasts over four hours
- Electrostatic purification eliminates oil fumes; triple filtration reduces odors; low operating noise
- Width: 890 mm; fits through a 900 mm door
- Front and rear air intake; mesh belt conveys scrap material with no waste
- Automatic shutdown when the lid is opened + ground fault protection + oil and water overflow alarm
Matching Processes to Material Properties
Expand Modules According to Production Line Requirements
Frequently Asked Questions About “DTF Powder Shaker”
01 Are you a manufacturer or a trading company?
We are a manufacturer of printing equipment based in Dongguan, Guangdong. Founded in 2003, we handle all aspects of our business—from research and development to precision machining, assembly, and commissioning—in our own factory. Our equipment has been exported to 83 countries and regions.
02 How do I choose between sublimation drum transfer and digital printing?
Sublimation drum transfer is suitable for continuous mass production of synthetic fabrics, offering high design fidelity, consistent colors, and low unit costs; for small-batch orders with multiple designs, digital printing may be a better option. Send us your fabric and design, and we’ll provide recommendations based on a side-by-side comparison.
03 Can we produce a sample first to verify the process?
Sure. Please send us the fabric and design, and we’ll create a sample using the appropriate machine model. We’ll provide you with parameters such as temperature, pressure, and speed, along with a sample piece of fabric. Once you’ve confirmed the transfer results, we’ll finalize the machine model.
04 Can the web width, speed, and production capacity be customized?
Yes. The web width, speed, tension control, and unwinding, web guiding, and rewinding configurations can all be adjusted according to the fabric characteristics and production capacity goals.
05 Is a DTF powder shaker a must-have?
It is essential. For DTF-printed transfers, the design will only adhere firmly to the fabric during heat pressing after the transfer has been dusted with heat-melt powder and dried to cure; without this step, the transfer cannot be used.
06 How do you choose the heating width for a Powder Shaker?
Match the printer’s maximum print width: Use the DF300 for 300mm models and the DF900L or DF700Pro for 600mm models. If the powder shaker’s width is smaller than the printer’s, it will limit the production output of the entire line.
07 What should the drying temperature be set to for a Powder Shaker?
For the DF700Pro, the recommended platform temperature is 75°C for heating and 110°C for drying; for the DF900L, the lamp heating reaches approximately 110°C. If the temperature is too high, oil and water may separate; if it is too low, the toner will not cure properly.
08 Does the Powder Shaker produce cooking fumes or odors?
Hot air and a slight odor may be present during operation, which is normal; the DF900L wide-format model features an electric field purification system and triple filtration, which significantly reduce odors in the air. We recommend using it in a well-ventilated workshop.
Inquire about the detailed specifications for this device
Please provide us with the material, roll width, speed, and target production capacity, and our engineers will evaluate the equipment configuration and delivery time.
- One-on-One Engineer Evaluation
- Configuration Plan Based on Materials and Production Capacity
- We will respond within one business day
You can also contact us directly
- Email [email protected]
- Phone +86 13713137075
- WhatsApp +86 13713137075